Art by Fuzzy

Pottery, Photography, Design - Brandon "Fuzzy" Schwartz

June Glaze Fire Results

Last month I glaze fired close to 20 pieces after mixing some glaze from dry powder.  The Pam’s Blue that I mixed turned out more blue-green instead of the blue-gray that I got from the pre-mixed pint.  It might be applied a little thin but I still like the result.  I got to test a few new glazes such as Espresso Bean and Saturated Iron by Coyote and Frosted Turquoise and Iron Lustre by Amaco.  Some of them turned out nicely.  Most of the items were functional ware: mugs, bowls, etc.

I finally got all the pieces photographed about a week ago and I finished cropping and sizing the photos last night.  Now, as I’m uploading these pictures the kiln is cranked up and bisque firing some of the stuff that I’ve thrown recently.   My wife wanted a set of bowls with handles, I’ve got a set of four mugs, there are some vases and other tall forms and  a few lidded vessels.

Golf Photos…

On Father’s Day we went on our usual golf outing.  My first (and possibly only) 9 holes of the year.  I took my camera along for fun.  Here are a couple decent shots I got:

I just took some pictures of some of my recent pottery (and found these golf pictures on the memory card).  As soon as I get those cropped and touched up I’ll post them.

Mixing Ceramics Glaze – Pam’s Blue

About a week ago I mixed up some glaze from a pre-mixed powder.  The powder was Pam’s Blue by Coyote and it was my first attempt at mixing any kind of glaze outside of the Huntington Clay House.  I got to purchase some new tools and I did some research and even talked to a few people on Clayart.  In the end it wasn’t too hard.

respirator

nice respirator

I talked my wife into helping and she had a lot of fun….  She took a couple pictures so I could share my experience.  The first thing you want to remember is: Safety First!  I got to wear a new respirator so I didn’t breathe too much of the dust when I was dumping the powder into the water. It’s a good look!

mixing glaze

mixing glaze

My wife mixed the water while I slowly dumped the powder .  It got pretty thick, even when I used all the water that the directions called for.  I was supposed to use 1 gallon and 1 pint but added a lot more by the end of the process.  I used my cordless drill and a 1 gallon paint mixer to mix the powder into the water. Even after mixing it with the drill mixer for a while it was still pretty lumpy.

glaze sieve

glaze sieve

I put it through an 80 mesh sieve three times.  After letting it sit overnight I mixed it up again with the drill mixer and it was ready to be applied to some bisque ware. I even checked the specific gravity or “density” with a hydrometer.

I’ll have  a full post on the items that I pulled out of the kiln.  The Pam’s Blue that I mixed from powder actually looks different than the pre-mixed pints I’ve used.  Check later to see how!

Shirt Designs: Track & Field 2010

The 2010 WN Middle School track team had an amazing season finishing 9-0 in dual meets, champions of the Westview Invitational, and….. LLC Conference Champions!!!!  I would like to think it was all because of the shirt design….  Or maybe it was the fantastic coaching staff?  Okay, in reality we had a really great group of 8th grade athletes to lead the way to an undefeated season.

Here is an early shirt design which was created in Adobe Illustrator CS4:

2010 Track Shirt Design

2010 Track Shirt Design

Here are photos of the actual shirts:

Team Shirt 2010

Team Shirt 2010

Conference Champions Shirt

Conference Champions Shirt

.

.

.

.

.

.

The boys voted for yellow team shirts but the design looks even better on gray.

Pottery Sale / Bisque Fire

I’m finally getting a chance to bisque fire all the stuff I made over spring break.  The kiln is on and firing!  I noticed as I was loading the kiln that I was rapidly running out of shelf space.  I decided to haul a bunch of my finished pieces to Ligonier for an “End of the School Year/Clean off the Shelves” Pottery Sale.  There was a really good response and out of the twenty-some pieces that I took in I only brought back four.  I consider most of the pieces I sold “my experimental work” as I was mostly trying glazes and different forms.  A few people requested items of a certain shape or glaze color for next time.  Now that I’m officially on summer break I plan to spend a good amount of time in the clay studio.  I’m going to head down to the hardware store to get a good respirator and one of those long mixers that can be attached to a drill.  Then I’ll be ready to mix up some Pam’s Blue glaze.  I’ve got about 3 weeks left of my class at IUSB but when I’m not in class or doing homework I hope to be glazing the bisque pieces and throwing some new items.