Art by Fuzzy

Pottery, Photography, Design - Brandon "Fuzzy" Schwartz

Like an Early Christmas!

I opened up the kiln today after yesterday’s glaze fire.  Early Christmas?  Early Christmas!

glazed pots - December 2010

glazed pots – December 2010

I spent almost all of Saturday preparing and glazing and kiln washing.  Everything went pretty smoothly.   I mixed up 10lbs. of Coyote’s Saturated Iron on Friday so it was ready to go.  That, along with my previously mixed Pam’s Blue, gave me two buckets of glaze to dip and pour.  I used a little bit of Coyote Red Gold and one vase has some Espresso Bean but other than that, just about everything else is part of the Pam’s Iron Collection.  (Pam’s Blue and/or Saturated Iron).

glaze fired pottery

glaze fired mugs, vases, bowls

I was happy with the way everything turned out.  No major flaws, no glaze drips, no visible glaze defects, no worries.  The Pam’s Blue running down over Red Gold effect that I achieved last glaze firing came through pretty well in the two bowls that I tried it with this time.   The Saturated Iron came out exactly the same as the pre-mixed pint I used previously.  It might have been just a little thick for dipping because I had to brush off some excess.  This usually left some darker areas compared to the reddish brown in most areas.  Could be something to experiment with next time.  I hope to shoot some decent photos of these pieces tomorrow or the next day and get them posted here (my apologies for the terrible lighting and yellow cast of this photo).

I had a small Holiday Pottery Sale at Ligonier Elementary the past few days.  I got some positive feedback when I stopped and talked to a few people today.  I might have even made enough money to buy more glaze materials!

In unrelated news I’ve been tweaking the design of the blog theme.  I’ll continue to fix things as I discover them.  If you have any feedback for the appearance of the blog I’d love to hear it.

Mixing Ceramics Glaze – Pam’s Blue

About a week ago I mixed up some glaze from a pre-mixed powder.  The powder was Pam’s Blue by Coyote and it was my first attempt at mixing any kind of glaze outside of the Huntington Clay House.  I got to purchase some new tools and I did some research and even talked to a few people on Clayart.  In the end it wasn’t too hard.

respirator

nice respirator

I talked my wife into helping and she had a lot of fun….  She took a couple pictures so I could share my experience.  The first thing you want to remember is: Safety First!  I got to wear a new respirator so I didn’t breathe too much of the dust when I was dumping the powder into the water. It’s a good look!

mixing glaze

mixing glaze

My wife mixed the water while I slowly dumped the powder .  It got pretty thick, even when I used all the water that the directions called for.  I was supposed to use 1 gallon and 1 pint but added a lot more by the end of the process.  I used my cordless drill and a 1 gallon paint mixer to mix the powder into the water. Even after mixing it with the drill mixer for a while it was still pretty lumpy.

glaze sieve

glaze sieve

I put it through an 80 mesh sieve three times.  After letting it sit overnight I mixed it up again with the drill mixer and it was ready to be applied to some bisque ware. I even checked the specific gravity or “density” with a hydrometer.

I’ll have  a full post on the items that I pulled out of the kiln.  The Pam’s Blue that I mixed from powder actually looks different than the pre-mixed pints I’ve used.  Check later to see how!

New Ceramic Supplies

I love Spring Break!  I recently did some internet shopping at Clay-King.com and Axner.com.  Both are good places to get ceramic and pottery supplies.

glazes by coyote and amaco

coyote and amaco glazes

Clay King was having a pretty good sale on glazes.  I ordered a few of my favorites (Coyote: Red Gold and Leopard Shino) and a few new colors to test (Coyote: Espresso Bean and Saturated Iron and Amaco: Frosted Turquoise and Iron Lustre).  I also ordered 10 lbs. of Pam’s Blue dry powder (by Coyote).  Finally!  As soon as I mix up the Pam’s Blue I will be able to dip and pour instead of brushing glaze onto every… single… piece…  This should drastically reduce the amount of time it takes to glaze a load of bisque ware.  I guess at first there will be a lot of blue mugs and bowls but if everything goes smoothly I hope to order some more glazes in dry powder form and mix up some large quantities.

hydrometer, sieve, glaze chemicals

hydrometer, sieve, glaze chemicals, kiln posts

Speaking of mixing glazes…  I needed a few more items to get the job done.  Axner had some pretty good prices on most of the stuff I needed so I ordered a hydrometer, sieve, kiln posts, and some other dry chemicals.  I hope to mix some of my own glazes in the future so I’m starting a small collection of dry chemicals.

In other not-very-exciting news I installed a more permanent light above my wheel and made a small shelf behind the wheel where I can put freshly thrown pots to dry.

In the somewhat-exciting department I have a few mugs and bowls drying on the shelf.  I just threw a few more before track practice today which need handles but I’ll try to put up some pictures before the bisque fire.  I’m trying a different kind of clay so I’m anxious to see how it fires.