Art by Fuzzy

Pottery, Photography, Design - Brandon "Fuzzy" Schwartz

The “SuperChuck” beta testing complete

It works!  In my last post I described how I made a version of the SuperChuck.  A couple days ago I got to try it for the first time.  I threw a nice vase form and it turned out to be the perfect candidate to trim in the chuck.  The black shelf liner material I used provided enough grip and I trimmed the bottom of the vase in no time.  You can see an “in progress” shot and then a picture of the finished pot next to the chuck.

I only wish that I would have made the chuck a little taller because the other vase/bottle that I threw had a neck that was a little long for the chuck.  I got around it by wadding up some of the extra shelf liner to make the chuck thinner in the middle so the shoulder of the pot would have a place to rest.

The SuperChuck (for trimming pots)

A while ago I got an email from one of the ceramics newsletters that I’ve subscribed to and it had a video of the “Superchuck”.  In a nutshell, the device is attached to the wheel and used to trim the bottom of vessels with narrow openings or delicate rims (which would prevent them from setting upside down on the wheel).  It looked pretty convenient and not terribly hard to make so I decided to give it a try.  That was a few months ago….  I would like to think that the slow process was more about taking my time and getting it just right but that wasn’t the case at all.  The process could have been shortened quite drastically but work and graduate classes and track season got in the way a bit.

I threw the main form a few months ago and maybe a month ago I glued that to a spare bat with Liquid Nails.  Then a few weeks ago I started testing some material to glue to the chuck to prevent the pots from slipping as they rotate.  The video suggests neoprene but I would have had to order it online and I didn’t want to invest too much in case I never use this thing more than once.  I finally decided to try “Shelf Liner” material.  Yeah, the stuff you line shelves with…  It was pretty cheap and it seemed to have the attributes that I was looking for.  I measured it out and cut it and then glued it to the chuck with Krazy glue.  It seems to be on there pretty tight.  And the material seems to offer pretty good grip.  As soon as I throw something decent, I’ll trim it with this “Superchuck” and see if mine works as well as the one in the video.  I’ll even try to remember to post my results here.

Custom Ceramic Sink: Finished

This is actually old news…  but the large ceramic pieces that I’ve been working on are complete.  I was asked to create a bathroom sink by a family that is building a new house.  I had never thrown anything so large on the wheel before but I was excited to try.  The first few attempts turned into large bowls because they weren’t big enough (mostly because I didn’t start with enough clay).  I finally got the diameter that I wanted but then the shape wasn’t quite right and the bottom was too thin.  On my fourth or fifth attempt I finally got a shape and size that I liked.  Then I made an extra just to be safe.  I did some measuring on a store-bought sink and then calculated for shrinkage and cut a hole for the drain.  After bisque firing, glazing, and glaze firing the hole was almost the perfect size.  I don’t know much about drains or plumbing but I hope the installation goes smoothly.  Below you can see a few photos of the finished products.  The sink is about 15 in. in diameter.  The bowl is probably closer to 12 in.

As you can see I’m a little closer to where I want to be as far as photographing my ceramic pieces.  I also got to try out my new tripod that I got for Christmas.  I think I pulled the finished pieces out of the kiln in mid February but I’ve been busy working on the Ligonier Elementary yearbook for the past few weeks.  Last weekend I rearranged my clay studio and put up some more shelves.  Be on the lookout for some pictures…